RPM 8080 Molded Chassis
Inspiration RC10talk.com scr8p
RPM "World's" front end kit (uses 1.02 shocks), narrow chassis rear end, bellcrank w Ball Bearings, special battery box/receiver mount. "This front end is designed to work best on a rough track because of the added suspension travel of using a naorrow kickplate and bulkhead, with longer arms. All of the injection molded parts are made of white dyeable nylon.
=====
this article from the web-- I dont have the original source, I think it was
a plastics injection industry magazine...
Car Action Magazine Article
Pg 1, Pg
2, Pg 3, Pg
4
RPM kit Instructions
pg 1, pg
2, pg 3
More RPM info here
